RAID 0 Data Recovery
IT professionals and business people alike tend to like Raid 0 hard disk configurations, since they offer speed and performance gains at a relatively low price. Unfortunately, one of the drawbacks of this type of setup is that there is a lack of redundancy between the hard drives, meaning that data loss in either drive can be difficult to deal with.
That makes RAID 0 data recovery challenging. If you find that your computer is losing data, or won’t boot up, due to a damaged hard disk, here are three things to remember:
- All is not lost. Contrary to popular belief, Raid 0 data recovery isn’t impossible – it just takes specialized equipment and knowledge. A team like ours can work on the drives individually, and in tandem, to recover lost or missing files.
- Raid 0 data recovery speed is important. Because this type of configuration doesn’t offer any redundancy, a computer system can be crippled without both hard Drive installed. That makes speed an important consideration when choosing the right data recovery partner.
- Raid 0 data recovery isn’t a routine operation for computer repair shops. Make no mistake: you definitely want to work with a specialist if you need this kind of work, since most computer repair companies won’t attempt it, and could further damage the drives if they don’t follow the proper procedures.
- Because Raid drives are typically found on servers and other business-class technology, you need a data recovery team that will protect the confidentiality of your information and keep your company’s files safe.
- Regardless of what you might hear elsewhere, know that Raid hard drives are hardly ever “completely lost,” even if they are damaged while in non-redundant configuration (like Raid 0).
RAID 1 Data Recovery
Generally speaking, success rates on Raid 1 data recovery projects tend to be good, since there are two drives to take information from. You still want to work with an experienced team, though, and avoid automatic data recovery software packages that might copy corrupted files or overwrite information you need.
As with all forms of data recovery and hard drive repair, the key to getting what you need from a damaged Raid 1 configuration is working with a team that has a reputation for extraordinary results. Remember, getting files from a damaged hard drive is both an art and a science
— the more complicated your hard drive configuration is, the more important it is to have the right level expertise on your side.
With a Raid 1 computer system, two or more hard drives are mirrored together to ensure redundancy from one drive to the next. That can protect you, at least in part, if you have damage to one of the drives you need to boot the system, or to store critical information.
Despite what you may read elsewhere, however, Raid 1 configurations do not offer complete protection against hard disk failure. On the one hand, having two hard disks fail would be incredibly unusual, but not impossible. A far more likely scenario is that files or sectors can become corrupted on one drive and then copied to another. For this reason, the redundancy of a Raid 1 setup is both a strength and a weakness. become corrupted on one drive and then copied to another. For this reason, the redundancy of a Raid 1 setup is both a strength and a weakness.
RAID 10 Data Recovery
While Raid 10 configurations boost performance, accessibility, and redundancy, they aren’t without their drawbacks. Certainly, hard drives can still fail in these configurations, and the overlapping nature of the drive arrays can make it difficult to recover damaged files and/or stop corrupted information from moving between drives which are mirrored to one another.
On top of that, there is always the potential for physical damage (from things like office fires and power surges) or operator error (usually involving accidental formatting or firmware changes) that can take an entire Raid 10 system off-line all at once.
When you encounter those kinds of situations, it’s important not to panic – just because you can’t access your hard drives, or the information on them, doesn’t mean that it’s gone forever. If you have the right Raid 10 data recovery specialists on your side, you can not only get the information you need to get your company back up-and-running, but get it back quickly and affordable.
RAID 50 Data Recovery
If your company uses a server with a series of hard drives in a RAID 50 configuration, you or your IT advisor probably chose the set-up for fast file transfers, maximum redundancy, and improved network performance. What you probably never hoped for, though, is for a pair of matched or mirrored hard drives to fail…or for corrupt data to spread from one drive to another and bring your entire system off-line
Although RAID 50 failures are relatively rare (outside of physical damage to multiple drives), it isn’t impossible to see your entire network go off-line all at once. If and when it does, you don’t want just any IT partner working for you, but a team of RAID 50 Data recovery specialists who can analyze the array as a whole, along with each drive individually, to find the fastest solution
Because the hard drives in a RAID 50 configuration can store virtually everything it takes to keep your company running, speed, a reputation for results, and a commitment to data security are all equally important. That’s why we encourage you to work with a team like TTR and maximize your chances of getting the files you need quickly and reliably.
When your Raid hard drives begin to fail – either individually or in tandem – you don’t want to waste time and risk further damage to the drives themselves. Call TTR to get the industry’s best experts evaluating the problem and restoring access to the files and folders you need.